COOLING INCUBATORS WITH LIGHTING

tritec® cooling incubators with lighting

The tritec® cooling incubators with lighting simulates reproducible light and temperature conditions for a constant storage of your sensitive samples.

The illumination is located outside of the interior space, mounted on the right and left side. The fluorescent tubes ensure perfect light distribution in the interior. Integrated ventilator avoid heat accumulation in the lighting compartments.

Additional information

Cooling Incubators with lighting

Capacity

  • 400 Litres
  • 700 Litres
  • 1400 Litres

 

Air circulation
for rapid and uniform temperature and humidity control, reducing the gradients to a minimum.

 

Microprocessor-controlled temperature and humidity controller

  • With digital LCD-display.
  • Entry with membrane keypad, readable on LCD-display.
  • Signalling in event of excess and falling of the set point acoustically.

 

Temperature ranges (depends on the model)

  • Without lighting
    from -9,9°C to 70° C /  resp. 5°C to 50°C
  • With lighting
    from 5°C to 55°C /  resp. 10°C to 40°C

 

Light “high intensive”

  • Variable programmable (temperature- or time dependent)
  • Exhaustive illumination of the inner room by 2 x 8 units vertical arranged florescent
    lamps with all-electronic ballast.
  • The luminaries are integrated on the right and left sidewall
  • Heat dissipation – self exhausting, out of the usable space

 

Solid door

  • With right or left-hand hinge
  • Partially with Inspection Window
  • Optional with door lock

 

Additional accessories:

  • Software
  • Door lock incl. 2 keys
  • Stainless steel shelves
  • Illuminated shelf
  • Printer (listing)
  • Socket outlet (damp room) located in the cabinet interior
  • Wall opening with piping connections and screw cap
  • Castors

Showing all 3 results

tritec® cooling incubators with lighting

The tritec® cooling incubators simulate reproducible light and temperature conditions for a constant storage of your sensitive samples. The lighting is located outside the interior on the right and left of the side walls. The fluorescent tubes ensure perfect light distribution in the interior. Built-in fans prevent heat accumulation in the lighting compartments.

 

Cooling incubators with lighting by tritec® – the ideal equipment for your laboratory

Cooling incubators with lighting by tritec® are climate-constant incubators which are used in biology, zoology or bacteriology. They can be found, for example, in laboratories in the food and beverage industry. They are extremely relevant for microbiological work processes because they create the necessary constant conditions for particularly sensitive samples. Cooling incubators with lighting are indispensable for handling light-sensitive samples and thus differ from conventional incubators, which are designed to ensure constant temperatures. The high-intensity lighting is mounted outside the interior on the side walls, so that an optimal, uniform light distribution can be guaranteed. The light intensity can be regulated according to time or temperature.

 

Cooling incubator with lighting – technical details at a glance

The cooling incubators with lighting by tritec® are available in four sizes: 182, 400, 700 and 1,400 litres. The high-intensity light can be variably programmed. This is either temperature- or time-dependent. Due to the use of eight fluorescent tubes on each of the two side walls of the cabinet, full-surface illumination of the cabinet interior can be achieved. They are controlled by fully electronic ballasts and are also heat dissipating and self-venting.

The integrated microprocessor-controlled temperature regulator can be operated via a membrane keypad and the data can be read off via an LCD display. An acoustic alarm signal indicates temperature fluctuations, i.e. exceeding or falling below the set value. Depending on the model, the temperature accuracy is +/- 0.3 and +/- 2 degrees Celsius. The temperature working ranges that can be operated are also model-dependent and variable. The following temperature ranges can be operated without lighting: 5 to 50 degrees Celsius or -9.9 to 70 degrees Celsius. With lighting a temperature regulation within 10 to 40 degrees respectively 5 to 55 degrees Celsius is possible. The recirculation enables the circulation of permanently precisely tempered air and prevents unwanted temperature jams in the corners of the cabinet or between the products.

In regard to the solid material door installed you can choose between the following options: Right or left stop, viewing window or no viewing window, with or without door lock (including two keys), a socket in the interior for the wet room typ, a wall opening with cover and a set of castors. The device software, stainless steel shelves as well as the printer for protocol printouts are also available as accessories.

 

HVAC technology by tritec®

Choose a cooling incubator with lighting by tritec® and obtain high-quality HVAC technology that you can rely on at all times. Further specific information on the various models can be found in the respective PDF data sheets.

We will be happy to answer your questions about our products by e-mail info@tritec-klima.de or by telephone on 0511 3523508.