INCUBATORS

With an incubator by tritec® you experience precision in the smallest space. A heated incubator by tritec® has an extended temperature range from 5 °C above room temperature to 99.9 °C, corresponds to the latest technology and is thus ideally designed for incubating your cultures. Get an incubator that suits your laboratory: Our incubators are available with a volume of 25 to 420 litres – on request, we also manufacture an incubator in dimensions according to your requirements.

Due to the compact design, the incubator requires little space in the laboratory and can be stacked in the smaller versions. All incubators of this series are equipped with an adjustable circulating air fan, real-time clock, and sterilization cycle. The interaction between temperature control and heater guarantees optimal temperature stability in your incubator. In addition, as with our cooling incubatorsCO2 fumigation is available as an option.

Additional information

tritec® incubator

Temperature range

  • 5 °C (2 °C) above ambient temperature up to 99.9 °C
  • Temperature accuracy in time +/-0.2 °C
  • Temperature accuracy spatially +/-1.0 °C

 

Volume

  • 25 litres
  • 51 litres
  • 130 litres
  • 420 litres

Two of the four models are tabletop and stackable

 

Solid door

  • with right-hand hinge
  • additional inner door made of glass
  • magnetic, all-round sealing strip, resistant to laboratory cleaning agents

 

Circulating air fan
Fan speed adjustable in 10 steps

 

PID temperature control
With digital LCD display: temperature and time are entered via membrane keypad and can be read on the LCD display – keypad is password protected to deny access to unauthorized persons.

 

Alarms

  • over- and undertemperature alarm
  • sensory error
  • real-time clock setting
  • data error
  • power failure

 

Alarm output
A potential free contact for external use is available

 

Temperature storage in the temperature control
For temperature regulation – reading the temperature (min./max./average) on the control is possible

 

Standby mode

 

Timer
Two different programs for timers are possible:

  • standard timer
  • real time program

 

Safety thermostat
Automatic safety system that works independently of the microprocessor controller – turns off the heaters in the incubator to prevent overheating

 

Sterilization cycle
The incubator is equipped with a fixed sterilization cycle of 180 °C in 40 minutes, which can be started manually – during sterilization, the remaining time in minutes is displayed on the temperature controller.

 

Other accessories

  • wall opening with piping connections and screw cap
  • CO2 fumigation

Showing the single result

An incubator by tritec® for the incubation of sensitive cultures

An incubator is a device in which in biology various development and growth processes of sensitive cultures can be created and maintained. The device uses controlled humidity and temperature parameters. If you choose a heating cabinet from our segment, we offer you four reliable, compactly built models for incubating cultures in your own laboratory. These are available in different sizes and each has an adjustable circulating air fan, various alarm systems, a temperature control, and a sterilization cycle. In addition, temperature deviations can be adjusted by the integrated real-time clock, which continues to run even in standby mode.

When developing our incubators, we place great emphasis on ease of use in addition to safety aspects. As soon as the incubator is in operation, it alarms about irregularities as well as deviations in temperature. It detects both overtemperature and undertemperature and emits acoustic signals and a visual alarm in the event of data and setting errors. We set the same high standards for all our climatic and cooling products, so we always deliver high-quality laboratory equipment to our partners.

 

A precise and reliable incubator for your laboratory

An incubator from our company has a high quality and is available in different sizes. The three smaller models, available in 25, 51, and 130 litres, are benchtop models that are stackable when space is limited. In the standard version, the units have two to four stainless steel shelves and can be expanded with up to 16 shelves. The large 430-litre incubator is not stackable, but can accommodate up to 23 slide-in grates.

The interaction of the PID temperature control and the integrated heater ensures constant heat inside the incubator. The temperature is entered via the password-protected keypad with digital LCD display. Our incubators are designed for the range from 5 °C above ambient temperature to 99.9 °C. For control purposes, 30 minutes after reaching the set point, the temperature is stored every minute in short intervals. It is possible to read off and check the actual status at the control unit at any time. Two different time sequences are available for this purpose: the real-time program and the timer. After completing the incubation of your cultures, you can initiate the sterilization cycle and put the incubator into stand-by mode.

 

Get a state-of-the-art incubator

An incubator manufactured by tritec® is state-of-the-art, because our development department and our certified quality management ensure that we continuously optimize ourselves. With almost forty years of experience, we are a leading expert in the field of laboratory technology and environmental simulation. With us you will find a low-maintenance incubator that you can expand with accessories and additional functions. For a detailed overview of the technical details and offers for our incubators, please refer to the data sheets deposited on this page. Our staff will be happy to advise you and answer any questions you may have. Contact us via our inquiry form or by phone – tritec® is looking forward to working with you.

 

Service from tritec®: More than just the purchase of an incubator

Buy an incubator from tritec® or any other product from our range of climatic products or cooling products. For a larger number of incubated cultures, you can use one of our incubator rooms, which gives you up to 100 m3 of space! Alternatively, we offer climatic cabinets and neutralizations systems, among others. Also discover our medical refrigeratorblood bank refrigeratorspark resistant laboratory refrigeratorlaboratory deep freezer, or freezer for blood plasma to secure samples and cultures at constant sub-zero temperatures.

Receive our comprehensive service. In our news, we will inform you about our current innovations as well as the use of our devices. If you have any questions about our laboratory technology or need support in any other way, we will be happy to help you with our certified quality management. Contact us and let us advise you comprehensively.