INCUBATOR ROOMS

An incubator room by tritec® is designed for gentle heating of your sensitive samples. To provide the desired reliability, accuracy, and safety control for the entire temperature range, the latest technologies for cooling, temperature control, and insulation are used. These precautions significantly reduce power consumption. Draw from our nearly 40 years of experience and get customised laboratory cooling products as well as climatic products for your laboratory.

Additional information

Incubation rooms

An incubation room by tritec® is suitable for the optimal incubation of your samples. At tritec® we offer you modern laboratory technology in high quality. Set the temperature and duration of incubation precisely and create the optimal conditions for incubating your samples with our innovative cooling and precise temperature control.

  • Temperature range: Ut +5 °C to 45 °C

 

Self-supporting wall, ceiling, and floor elements

Sandwich construction, 60-150 mm thick thermal insulation made of rigid polyurethane foam foamed with cyclopentane (closed cell), with a foam density of 40kg/m3 and a thermal conductivity group 025 according to DIN 4108. Thermal bridge-free cell elements, stable and dimensionally accurate. Element connection by tongue and groove system with PE foam tape seal between the elements and corrosion-protected eccentric cam locks. Wall and ceiling elements made of sendzimier galvanized sheet steel, SmartProtec white, antimicrobial coating

Door width selectable from 700 to 1000 x 2000 mm single-leaf. Door hinge optionally DIN right or left. (larger dimensions or double-leaf on request). Outward opening overlay door with magnetic sealing profile, rising and adjustable hinges, hairpin latch with spring-loaded latch with cylinder lock and emergency opener.

Equipment on customer’s request

  • capacity: 5 m3 to 100 m3, other sizes on request
  • horizontal / vertical air convection allows excellent uniformity
  • electronic PID controller for temperature
  • wall penetration from 30 mm to 200 mm diameter
  • on request: stainless steel casing
  • wide range of accessories

 

The large number of variants in terms of equipment, size, current and future applications, use of any available energy should be carefully clarified in advance through technical discussions. This includes informative offers, working sketches (ground plan, front view, vertical section). Planning and decision-making aids, which can save a lot of money if carefully thought through.

Your wishes are our mission! Please contact us.

Have we stirred your interest? Please use our prepared PDF form to request further details. Save the form on your PC, fill it out digitally and save your entries again.

Then send it back to us by e-mail or print it out and fax it to us. We will contact you immediately and work out the best possible solution.

 

Your wishes are our mission! Please contact us.

Have we stirred your interest? Please use our prepared PDF form to request further details. Save the form on your PC, fill it out digitally and save your entries again.

Then send it back to us by e-mail or print it out and fax it to us. We will contact you immediately and work out the best possible solution.

An incubator room by tritec® enables you to work precisely

An incubator room manufactured by tritec® has numerous advantages especially concerning its reliability and precision. These properties are of paramount importance in practical applications in laboratories or clinics to ensure gentle heating of sensitive samples. That is why we are constantly developing our standards so that our products stand out for their accuracy and reliability, but also for the special safety controls for the temperature range. In addition to quality, our priority is to provide our customers with the best possible advice. Many years of experience and an always up-to-date level of knowledge enable us to react to inquiries quickly and individually. By working closely with you, we can ensure that you receive a high-quality product that is tailored to your requirements. Trust the professional expertise of tritec® and work precisely and purposefully, with a high-quality incubator room!

 

The characteristics of an incubator room of our product range

Typically, an incubator room by tritec® covers a temperature range from +5 °C to +45 °C, and the capacity can vary from 5 m3 to 100 m3. For our coolers, the temperature control as well as the insulation we use only the state-of-the-art technologies, which also results in a reduction of electricity consumption for the customer. Each incubation room consists of dimensionally accurate self-supporting wall, ceiling, and floor elements and is manufactured to fit the customer’s requirements in order to ensure precise and targeted work. The large number of design options, such as the size of the doors or wall penetration, as well as the enormous selection of accessories, suggests careful planning, in which we will support you by means of expert discussions and will be at your side as a reliable and competent partner when decisions are made. Do you need an incubator room with other dimensions or temperature ranges? Please contact us. We are committed with all our heart and highest expertise to a conception according to your specifications.

 

The use of the incubator room: our expertise and service

Efficient work with sensitive samples in an incubator room requires precise equipment. tritec® has proven itself to be a trustworthy partner in design and manufacturing, drawing on decades of experience: manufacturing is based on state-of-the-art standards. Our strict testing mechanisms and the analysis of the production steps guarantee a constant high quality, so that you receive a low-maintenance product, which supports your technical personnel with its precision and reliability. This allows them to devote all their attention to the actual work. In addition to excellent quality, competent advice is especially important to us, because our products, such as the incubator room, must meet the specific requirements of each customer. Only then can we guarantee the perfect function and accuracy of the product, which are essential for our customers. Ask our service for client-tailored products. Our certified quality management is there for you.

 

Incubator rooms and more: our versatile product range

For your incubator rooms as well as for another of our modern products, we have shown to be a reliable partner. If you need further products for your laboratory or practice, for example an incubator, a neutralization system or a medical refrigerator, we are at your side with expert advice and supply you with high-quality products according to the latest state of research. Ask for an incubator or another of our products right away.